Web Based (CGI) Install


To automatically set up a web-based install (on DragonFlyBSD):
To manually set up a web-based install:
# dhclient -1 if0
# ifconfig if0

where if0 is the name of your network interface. The second command will display the IP address assigned to you. If you do not have a DHCP server running, you'll have to assign an address statically with
# ifconfig if0 10.0.0.1 netmask 255.255.255.0
# route add default 10.0.0.123

where if0 is the name of your network interface, 10.0.0.1 is the static IP you wish to assign, and 10.0.0.123 is the IP of the other computer on the network that you want to route traffic to/from.
# /usr/local/sbin/dfuibe_installer &
/usr/local/etc/rc.d/thttpd.sh.sample start
# shutdown -r now


Notes:
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki